Installing Supply Line - Underbody Section
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1
Tighten screw on line bracket.
- Tightening torque 9 Nm (6.5 ftlb.)
- 1.2
Tighten screws on the protective plate.
- Tightening torque 9 Nm (6.5 ftlb.)