Removing Tank Vent

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Open heat protection -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat protection on tank vent valve
Loosen tank vent valve -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tank vent valve
1. 2.1 Loosen spring band clamp -2- using > VAS 6890 - spring band clamp pliers and pull hose off the tank vent valve
2. 2.2 Release and disconnect electric plug connection -3- .
3. 2.3 Unclip tank vent valve -1- fro m holders -4- .
Unscrew screw -1- and disconnect line -2- from turbocharger.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tank vent valve line on turbocharger
Remove tank vent valve line -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tank vent valve line
1. 4.1 Release and disconnect quick connector securing tank vent valve line -2- to centre intake-air distributor.
2. 4.2 Remove tank vent valve line -1- together with tank vent valve.