Installing Fuel Tank
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1
Tighten screws securing fuel tank to the body.
- Tightening torque 20 Nm (15 ftlb.)
- 1.2
Tighten screws for stone guard.
- Tightening torque 20 Nm (15 ftlb.)
- 1.3
Tighten screws on tank filler neck holder.
- Tightening torque 15 Nm (11 ftlb.)
- 1.4
Tighten screws for heat shield on fuel tank.
- Tightening torque 4 Nm (3 ftlb.)
- 1.5
Tighten nuts for right heat shield.
- Tightening torque 2.5 Nm (1.75 ftlb.)
- 1.6
Tighten nuts for centre rear heat shield.
- Tightening torque 20 Nm (15 ftlb.)
- 1.1
Tighten screws securing fuel tank to the body.