Installing Pressure Sensor

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Toxic substances

Danger of poisoning or suffocation
Danger of burns to the eyes and skin
1. → Ventilate the work area well.
2. → Never ingest or inhale.
3. → Read specific information on the Hazard Sheet.
4. → Wear personal protective gear.
5. → Do not smoke, eat or drink in the work area.

WARNING: Highly inflammable or explosive materials

Danger of fire or explosion
1. → Avoid contact with hot parts or sources of ignition.
2. → Use suction to remove ignitable vapours.
3. → Attach warning sign in a clearly visible position.
4. →Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
5. → Secure collection containers/vessels to prevent them from tipping over.

WARNING: Leaking fuel supply lines

Emerging fuel
Risk of fire
1. → Perform leak test.

Information

Coat thread of the pressure sensor with Microgleit DF 977 S. Observe drying time of at least 5 minutes before fitting.

Install pressure sensor -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure sensor
1. 1.1 Coat thread of pressure sensor -1- with a light coating of Microgleit DF 977 S.
2. 1.2 Screw in and tighten pressure sensor -1- .
3. 1.3 Connect and lock cable plug -4-