LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (15 Engine - Cylinder Head, Valve Drive 2.9L -- 95B - MACAN (95B)) >> WM, 158419 Removing And Installing Camshaft Actuator (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper chain housing cover.
    • Removing and installing upper chain housing cover (V6 Turbo) 
  2. Remove centre intake-air distributor.
    • 244619 Removing and installing centre intake-air distributor 
  3. Remove brake booster vacuum pump.
    • 477619 Removing and installing brake booster vacuum pump 
  4. Remove left engine carrier -1-  .
    G15150533Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Left engine carrier

    1. 4.1  Remove screws -2-  .
    2. 4.2  Remove left engine carrier -1-  .
  5. Remove vacuum reservoir -1-  .
    G15150534Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Vacuum reservoir

    1. 5.1  Remove screws -2-  .
    2. 5.2  Unscrew nuts -3-  .
    3. 5.3  Remove vacuum reservoir -1-  and set it aside.
  6. Secure engine to assembly support.
    • 100113 Securing engine on assembly support (V6 Turbo) 
scientia non olet · About LEMON Manuals