Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Nuts securing holder to right cylinder head cover | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Nuts securing holder for solenoid valves to right cylinder head cover | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screws for cylinder head cover on right cylinder bank | Replace following removal. | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screws for cylinder head cover on right cylinder bank | Replace following removal. | Torque angle | + 90° | ||
| Screws for cylinder head cover on left cylinder bank | Replace following removal. | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screws for cylinder head cover on left cylinder bank | Replace following removal. | Torque angle | + 90° |