LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (15 Engine - Cylinder Head, Valve Drive 2.9L -- 95B - MACAN (95B)) >> WM, 155919 Removing And Installing Valve Lifters (V6 Turbo) >> Removing Valve Lifters

Removing Valve Lifters

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. If you intend to re-use valve lifters, safety clips and valve levers: 

    Mark allocation of the components using a coloured marker.

    Information 

    If you intend to re-use hydraulic tappets and valve levers, check that the components are not damaged.

  2. Remove valve lifter -1-  and valve lever -2-  .
    1. 2.1  Take valve lifter -1-  with valve lever -2-  out of the cylinder head together.
    2. 2.2  Check component allocation and check that all components are fitted.
    G15150447Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Valve lifter with valve lever in cylinder head

  3. Remove valve lifter -2-  from valve lever -3-  .
    1. 3.1  Open safety clip -1-  carefully.
    2. 3.2  Remove safety clip -1-  and valve lifter -2-  .
    G15150448Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Valve lifter

scientia non olet · About LEMON Manuals