Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw securing torque sup port bracket to engine (top) | M8 x 45 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Fastening nut securing ground line to ignition coil | M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw for solenoid hydraulic valve for valve lift adjustment | Replace following removal. | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screw for solenoid hydraulic valve for valve lift adjustment | Replace following removal. | Torque angle | + 90° |