LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (15 Engine - Cylinder Head, Valve Drive 2.9L -- 95B - MACAN (95B)) >> WM, 153919 Removing And Installing Camshaft Controller Actuator (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front strut.
    • 408619 Remove and install front strut 
  2. Install heat shield.
    • 261219 Removing and installing heat shield (V6 Turbo) 
  3. Only after removing camshaft controller actuator on intake side of cylinder bank 1: 

    Fill up coolant.

    • 193817 Draining and filling coolant 
scientia non olet · About LEMON Manuals