Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw for stopper on camshaft | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screw plug securing crankshaft | Replace | Tightening torque | 40 Nm (29.5 ftlb.) | ||
| Control valve for camshaft controller for outlet camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Control valve for camshaft controller for outlet camshaft | Final tightening | + 35° | |||
| Control valve for camshaft controller for intake camshaft | Initial tightening | 30 Nm (22 ftlb.) | |||
| Control valve for camshaft controller for intake camshaft | Final tightening | + 35° | |||
| Tensioning rail bearing pins on cylinder bank 1 | Tightening torque | 23 Nm (17 ftlb.) |