Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Screws for coolant pipes |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Upper screws on chain housing cover in chain box |
Replace following removal. |
Tightening torque |
8 Nm (6 ftlb.) |
|
|
| Upper screws on chain housing cover in chain box |
Replace following removal. |
Final tightening |
+ 90° |
|
|
| Screw for lower chain housing cover |
M6 x 25 (19ea.)/replace aluminium screws with steel screws, observe specified tightening sequence |
Initial tightening |
3 Nm (2 ftlb.) |
|
|
| Screw for lower chain housing cover |
|
Final tightening |
+ 90° |
|
|
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Double screw for additional coolant pump (turbocharger) |
M6 x 14/M6 x 14 |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Screws securing additional coolant pump (turbocharger) to holder |
|
Tightening torque |
1.5 Nm (1 ftlb.) |
|
|
| Screws for coolant pipes |
|
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Fastening screw for high-pressure fuel line |
Replace |
tightening torque |
8 Nm (5.9 ftlb.) |
|
|
| Fastening screw for high-pressure fuel line |
|
final tightening torque |
+ 45 Nm (33.2 ftlb.) |
|
|
| Union nut for fuel line |
Coat thread on union nuts with Microgleit DF 977S. Observe drying time of at least 5 minutes before fitting. |
tightening torque of |
10 Nm (7.4 ftlb.) |
|
|
| Union nut for fuel line |
Coat thread on union nut with Microgleit DF 977S. Observe drying time of at least 5 minutes before fitting. |
Torque angle |
60° |
|
|
| Screw for chain housing cover on cylinder bank 1 |
M6 x 22 (8ea.)/replace, observe specified tightening sequence |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| Screw for chain housing cover on cylinder bank 2 |
M6 x 22 (7ea.)/replace, observe specified tightening sequence |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|