LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (15 Engine - Cylinder Head, Valve Drive 2.9L -- 95B - MACAN (95B)) >> WM, 153319 Removing And Installing Upper Chain Housing Cover (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper chain housing cover.
    • 153319 Removing and installing upper chain housing cover (V6 turbo) 
  2. Remove pulse sender.
    • 287319 Removing and installing pulse sender (V6 turbo) 
  3. Remove drive plate.
    • 136319 Removing and installing drive plate 


  1. Remove the engine.
    • 100119 Removing and installing engine 
  2. For engine with particle filter 

    Remove particle filter.

    • 267419 Removing and installing particle filter 
  3. For engine without particle filter 

    Remove catalytic converter.

    • 267319 Removing and installing catalytic converter 
  4. Only for removing upper chain housing cover on right cylinder bank: 

    Remove additional coolant pump holder -1-  .

    1. 4.1  Unscrew screws for additional coolant pump -2-  at the holder -1-  .
    2. 4.2  Unscrew double screw for additional coolant pump holder -3-  .
    3. 4.3  Remove additional coolant pump holder -1-  .
    G15150374Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Additional coolant pump (right cylinder bank)

scientia non olet · About LEMON Manuals