Removing Camshafts
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.
- Remove locking tools -2 to 5-
.
Camshaft clamp
Information
The camshaft bearing covers and the corresponding installation positions are numbered and do not have to be marked.
- Remove camshafts -5 and 6-
.
- 2.1 Unscrew screws on camshaft bearing covers -Arrows- .
- 2.2 Remove camshaft bearing covers -1 to. 4- and set them down on a suitable base.
- 2.3 Remove camshafts -5 and 6- and set them down on a slitable base.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Camshaft bearing covers