WM, 150506 Checking And Setting Camshaft Timing (V6 Turbo): Tools

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Tool denomination	Type	Tool number	Image
counterhold tool	VW tool	> T90001	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Ring wrench insert, a/f 41	Vehicle-specific workshop equipment	> VAS 261 001	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
camshaft clamp	VW tool	> T40331	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
locking pin	VW tool	> T40069	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
socket E24	VW tool	> T90000	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
torque wrench 6-50 Nm (4.5-37 ftlb.)	General workshop equipment	> V. A. G 1331A	Courtesy of PORSCHE CARS NORTH AMERICA, INC.
counter-hold tool	VW tool	> T90002	Courtesy of PORSCHE CARS NORTH AMERICA, INC.