LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (15 Engine - Cylinder Head, Valve Drive 2.9L -- 95B - MACAN (95B)) >> WM, 150506 Checking And Setting Camshaft Timing (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper chain housing cover.
    • Removing and installing upper chain housing cover (V6 Turbo) 
  2. Remove centre intake-air distributor.
    • 244619 Removing and installing centre intake-air distributor 
  3. Remove brake booster vacuum pump.
    • 477619 Removing and installing brake booster vacuum pump 
  4. Remove engine.
    • 100127 Removing and mounting engine 
  5. Remove left engine carrier -1- 
    1. 5.1  Unscrew and remove screws -2-  .
    2. 5.2  Remove left engine carrier -1-  .
    G15150331Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Left engine carrier

  6. Remove vacuum reservoir -1-  .
    1. 6.1  Unscrew and remove screws -2-  .
    2. 6.2  Unscrew nuts -3-  .
    3. 6.3  Remove vacuum reservoir -1-  and set it aside.
    G15150332Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Vacuum reservoir

  7. Secure engine to assembly support.
    • 100113 Securing engine on assembly support (V6 Turbo) 
scientia non olet · About LEMON Manuals