Installing Brake Fluid Reservoir
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Brake fluid reservoir
- 1.1 Tighten screw on brake fluid reservoir -3-
.
> Tightening - torque 5 Nm (3.5 ftlb.)
- 1.2 Fill brake fluid into the brake fluid reservoir until the brake fluid level is between MIN and MAX.
- 1.3 Remove any emerging brake fluid immediately using suitable aids; clean affected components with water and dry them.
- 1.1 Tighten screw on brake fluid reservoir -3-
.