Removing Control Unit For Electric Parking Brake

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

NOTIFICATION

Voltage peaks

Risk of damage to electrical load or to the control unit
1. → Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).
2. → Switch off electrical loads before disconnecting or removing them.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work.
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
Do not touch electric pins and plug contacts.

Unclip control unit for electric parking brake -1- from holder -2- , disengage it and pull it out -Arrow- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for control unit for electric parking brake
Release electric plug connection -1- -arrow a- and disconnect it -arrow b- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection