LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (46 Brakes - Brake Mechanism 2.9L -- 95B - MACAN (95B)) >> WM, 465304 Measuring Rear Brake Discs >> Measuring Rear Brake Discs >> Measuring Rear Brake Disc - Minimum Thickness

Measuring Rear Brake Disc - Minimum Thickness

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the brake disc using a suitable micrometer screw in at least three different places, offset by 120° -Arrows-  .
    G15156437Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Wear areas on brake disc friction surface

  2. If the measured value is below the wear limit at one or more measuring points:

    Replace brake disc.

    > 465319 - REMOVING AND INSTALLING REAR BRAKE DISC 

Rear brake disc thickness wear limit: 2 mm
Maximum thickness tolerance of brake discs: 0.01 mm
scientia non olet · About LEMON Manuals