Checking Thickness Tolerance
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The required technical values must be taken from the
document.
- Remove wheel.
> 440519 - REMOVING AND INSTALLING WHEEL - PORTION ON "REMOVING"
- Use a suitable micrometer screw to measure the thickness tolerance at 8 points within the braking surface.
- 2.1 Compare measured values with the specifications and continue according to the results.
- Fit wheel.
> 440519 - REMOVING AND INSTALLING WHEEL - PORTION ON "INSTALLING"