LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (13 Engine - Crank Drive, Pistons 2.9L -- 95B - MACAN (95B)) >> WM, 138655 Replacing Balance Shaft Bearing (V6 Turbo) >> Installing Balance Shaft Bearing

Installing Balance Shaft Bearing

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit adapter T40395/2  on the roller bearing at the correct side. The chamfer -Arrow-  must be facing the roller bearing and determines the installation depth.
    G15150320Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Adapter T40395/2

  2. Align adapter -T40395/3-  . The side without the chamfer -Arrows-  points downwards
    G15150321Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Adapter T40395/3

  3. Insert roller bearing at the front -1-  and rear -2-  using the spindle -T40395/1-  , adapter -T40395/2-  and adapter -T40395/3-  as far as it will go by turning the nut -T40395/4-  .
    G15150322Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Using special tool T40395

scientia non olet · About LEMON Manuals