Subsequent Work

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Install balance shaft bracing wheel.
- WM, 138019 REMOVING AND INSTALLING BALANCE SHAFT DRIVE WHEEL (V6 TURBO)
Fit new screw -1- on balance weight -2- .
1. 2.1 Get another person to counter the crankshaft if necessary.
2. 2.2 Counter the crankshaft using > T40049 - special wrench , fit new screw -1- and tighten to > Initial - tightening 40 Nm (30 ftlb.) and > Torque angle + 90°
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Balance weight screw
Install crankcase cover.
- WM, 101419 REMOVING AND INSTALLING FRONT CRANKCASE COVER (V6 TURBO)