Removing Balance Shaft (V6 Turbo)

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

NOTIFICATION

Dirt and contamination

Risk of damage to units or components
1. → Protect components from dirt and contamination.
2. → Clean or replace dirty components.

Remove balance shaft -3- .
1. 1.1 Loosen and unscrew screws -1- and remove end plate -22- for balance shaft -3- .
2. 1.2 Remove old seal and remove thrust washer -4- from balance shaft -3- .
3. 1.3 Remove balance shaft -3- for transmission side from the engine block.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Balance shaft end plate