LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (13 Engine - Crank Drive, Pistons 2.9L -- 95B - MACAN (95B)) >> WM, 138519 Removing And Installing Balance Shaft (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove crankcase cover.
  2. Remove balance weight -2-  .
    1. 2.1  Get another person to counter the crankshaft if necessary.
    2. 2.2  Counter the crankshaft using > T40049 - special wrench  and loosen and unscrew screw -1-  .
    3. 2.3  Pull balance weight -2-  off the balance shaft.
    G15150312Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Balance weight screw

  3. Remove balance shaft bracing wheel.
scientia non olet · About LEMON Manuals