LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (13 Engine - Crank Drive, Pistons 2.9L -- 95B - MACAN (95B)) >> WM, 138019 Removing And Installing Balance Shaft Drive Wheel (V6 Turbo) >> Removing Balance Shaft Drive Wheel

Removing Balance Shaft Drive Wheel

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove balance shaft bracing wheel -1-  .
    1. 1.1  Insert special tool > T40362 - Locking tool  as far as it will go into the cut-out on the balance shaft bracing wheel -1-  . Then turn it 180° clockwise to lock the backlash compensation.
    2. 1.2  Loosen and unscrew screw -2-  and counter the crankshaft at the previously fitted special tool > T40049 - Special wrench  .
    3. 1.3  Remove balance shaft bracing wheel -1-  .
    G15150308Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Balance shaft bracing wheel

  2. Turn special tool > T40362 - Locking tool  180° anti-clockwise and pull it out of the balance shaft bracing wheel.
scientia non olet · About LEMON Manuals