LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (13 Engine - Crank Drive, Pistons 2.9L -- 95B - MACAN (95B)) >> WM, 137519 Removing And Installing Crankshaft Vibration Damper (V6 Turbo) >> Removing Crankshaft Vibration Damper >> Removing Crankshaft Vibration Damper (V6 Turbo)

Removing Crankshaft Vibration Damper (V6 Turbo)

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit counterhold tool T40330/1. 
    G15150292Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Counterhold tool T40330 on vibration balancer

    1. 1.1  Turn the crankshaft so that counterhold tool T40330/1  can be fitted.
    2. 1.2  Fit adapter T40330/4 -2-  to the crankshaft vibration damper using counterhold tool T40330/1 -4-  .
    3. 1.3  Fit spacer sleeve T40330/3 -3-  underneath, then fit and tighten screw -Arrow-  .
      • Tightening torque 23 Nm (17 ftlb.) 
    4. 1.4  Loosen and unscrew screw -1-  .
  2. Remove counterhold tool T40330/1. 
  3. Remove crankshaft vibration damper.
scientia non olet · About LEMON Manuals