Installing Crankshaft Sealing Ring - Belt Side
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Hot components
- Risk of burns
- → Let hot components cool down.
- → Wear personal protective gear.
- Fit guide sleeve -1-
from >
T40320 - assembly tool /2
on the crankshaft and position crankshaft sealing ring (belt side) -2-
.
Guide sleeve
Information
Leave guide sleeve fitted on the crankshaft.
- Install new
crankshaft sealing ring (belt side)-1-
.
Pressure piece
- 2.1 Fit pressure piece -2- from > T40320 - assembly tool /1 on the crankshaft with vibration damper -3- screw.
- 2.2 Press crankshaft sealing ring (belt side) -1- in as far as it will go.
- 2.3 Remove pressure piece -2- and guide sleeve from > T40320 - assembly tool /1.