Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing drive plate to crankshaft | M10 x 1 x 29/always replace after removal./tighten in diagonally opposite sequence. | pre-tightening | 60 Nm (44.3 ftlb.) | ||
| Fastening screw securing drive plate to crankshaft | final-tightening | + 90° |