Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws for crankshaft bearing covers | Replace following removal. | Initial tightening | 30 Nm (22 ftlb.) | ||
| Screws for crankshaft bearing covers | Replace following removal. | Torque angle | + 90° | ||
| Screws for crankshaft bearing covers, side | Replace following removal. | Tightening torque | 20 Nm (15 ftlb.) | ||
| Screws for crankshaft bearing covers, side | Replace following removal. | Torque angle | + 90° | ||
| Screw on guide rail for oil pump | Tightening torque | 9 Nm (6.5 ftlb.) |