Subsequent Work
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Install oil windage tray -1-
.
Oil windage tray
- 1.1 Position oil windage tray -1- on cylinder block.
- 1.2 Replace screws for oil windage tray -2 and 3- .
- 1.3 Fit new screws securing oil windage tray to cylinder block -2- and tighten in diagonally opposite sequence.
M6 x 18 (3 ea.):
- Initial tightening 3 Nm (2 ftlb.)
- Final tightening + 90°
M6 x 30 (13 ea.):
- Initial tightening 3 Nm (2 ftlb.)
- Final tightening + 90°
- 1.4 Tighten new
screws securing chain housing cover to oil windage tray -3-
.
- Initial tightening 3 Nm (2 ftlb.)
- Final tightening + 90°
- Install oil guide housing.
- Removing and installing oil guide housing (V6 Turbo)
- Install cylinder head.
Removing and installing cylinder head