Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | > Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw securing centre transmission housing to front transmission housing | Continue to tighten In diagonally opposite sequence | Final tightening | + 120° | ||
| Screw securing side shaft to all-wheel output shaft | M14 x 1.5/replace | Initial tightening | 100 Nm (74 ftlb.) | ||
| Screw securing side shaft to all-wheel output shaft | Final tightening | + 120° | |||
| Screw securing centre transmission housing to front transmission housing | Tighten In diagonally opposite sequence/replace | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screw securing transmission housing cover to centre transmission housing | M8x43/replace | Initial tightening torque | 20 Nm (15 ftlb.) | ||
| Screw securing transmission housing cover to centre transmission housing | M8x55/replace | Initial tightening torque | 15 Nm (11 ftlb.) | ||
| Screw securing transmission housing cover to centre transmission housing | Final tightening | + 90° | |||
| Screw securing lid to final drive | Final tightening | + 90° |