Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | > Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Double clutch transmission to engine | Screw, M10x60/replace | Initial tightening | 15 Nm (11 ftlb.) | ||
| Double clutch transmission to engine | Screw, M10x60/replace | Final tightening | + 105° | ||
| Double clutch transmission to engine | Screw, M10x50/replace | Initial tightening | 15 Nm (11 ftlb.) | ||
| Double clutch transmission to engine | Screw, M10x50/replace | Final tightening | + 105° | ||
| Double clutch transmission to engine | Screw, M12x100/replace | Initial tightening | 30 Nm (22 ftlb.) | ||
| Double clutch transmission to engine | Screw, M12x100/replace | Final tightening | + 105° | ||
| Double clutch transmission to engine | Screw, M12x125/replace | Initial tightening | 30 Nm (22 ftlb.) | ||
| Double clutch transmission to engine | Screw, M12x125/replace | Final tightening | + 105° | ||
| Screw flywheel to drive plate | Replace | Tightening torque | 60 Nm (44.3 ftlb.) | ||
| Screw | Screw on transmission support | Tightening torque | 70 Nm (52 ftlb.) | ||
| Fastening screw securing connection piece for ATF lines to transmission | M8x25 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Fastening screw | ATF line to transmission | Tightening torque | 8 Nm (6 ftlb.) | ||
| Fastening nut | ATF lines to holder | Tightening torque | 8 Nm (6 ftlb.) | ||
| Fastening screws | Holder to oil pan | Tightening torque | 8 Nm (6 ftlb.) |