Subsequent Work
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Secure both front drive shafts at the transmission side.
> 404119 - Removing and installing front drive shaft
- Install rear cardan shaft.
- Install power-steering gear.
> 489019 - Removing and installing power-steering gear
- Install front-axle support.
- Connect both sections of the line for ATF cooling
> 386219 - Removing and installing line for ATF cooling (V6 Turbo)
- Depending on model: Install particle filter/catalytic converter.
Vehicles with particle filter:
> 267419 - Removing and installing the particle filter (V6 Monoturbo/two-piece holder)
Vehicles without particle filter:
- Secure torque support to the engine.
> 103719 - Removing and installing torque support (V6 Turbo)
- Connect the battery.
> 270619 - REMOVING AND INSTALLING VEHICLE ELECTRICAL SYSTEM BATTERY