Securing Double Clutch Transmission

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Danger of objects or loads falling down

Risk of squashing or crushing

Secure components to prevent them from falling down.

T40294 - Hook and support tool-1 - must be secured to the engine.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Hook and support tool T40294
1. 1.1 > T40294 - Hook and support tool-1 - must be secured to the > VAS 6100 -workshop crane -2-
2. 1.2 > T40294 - Hook and support tool-1 - must be engaged in the housing bores at the right side of the double clutch transmission and secured using the knurled screw -2- at the left side of the double clutch transmission
> VW309A - Support plate -1- must be screwed to the > T40294 - hook and support tool -2-

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Hook and support tool on double clutch transmission
Use the > VAS 6100 - workshop crane -1- to fit the double clutch transmission into the > VAS 6095A - engine and gearbox bracket -2-

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Double clutch transmission on VAS 6095A engine and gearbox bracket
> VAS 6100 - Workshop crane together with > T40294 - hook and support tool must be retrieved from the engine.