Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Air inlet housing cover to body | Hexagon nut | Tightening torque | 3.5 Nm (2.5 ftlb.) | ||
| Mounting saddle to body | M10 x 35 thread/observe specified tightening sequence/always use new screws or bolts following removal | Initial tightening | 40 Nm (30 ftlb.) | ||
| Mounting saddle to body | M10 x 35 thread/observe specified tightening sequence/always use new screws or bolts following removal | Final tightening | + 90° | ||
| Distance from PASM connector holder to coil spring mounting | Permitted minimum distance | Length | 66 mm | ||
| Distance from PASM connector holder to coil spring mounting | Permitted maximum distance | Length | 69 mm | ||
| Pushing PASM line into retaining clip | Length | 12.5 mm | +/- 2.5 mm | ||
|
Pushing PASM line into retaining clip |