LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (40 Wheel Suspension Front Drive Shaft 2.9L -- 95B - MACAN (95B)) >> WM, 407819 Removing And Installing Connecting Link For Anti-Roll Bar >> Removing Connecting Link For Anti-Roll Bar

Removing Connecting Link For Anti-Roll Bar

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove connecting link for anti-roll bar -1-  .
    G15155877Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Connecting link for anti-roll bar

    1. 1.1 Unscrew nut on connecting link for anti-roll bar -3-  and counter at screw -2-  .
    2. 1.2 Unscrew screw securing connecting link for anti-roll bar -4-  to the spring strut fork.
    3. 1.3 Remove connecting link for anti-roll bar -1-  .
  2. Replace screws and nuts securing connecting link for anti-roll bar.
scientia non olet · About LEMON Manuals