LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (40 Wheel Suspension Front Drive Shaft 2.9L -- 95B - MACAN (95B)) >> WM, 407719 Removing And Installing Front Anti-Roll Bar >> Removing And Installing Front Anti-Roll Bar >> Removing Front Anti-Roll Bar

Removing Front Anti-Roll Bar

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of objects or loads falling down 
  • Risk of squashing or crushing 

    → Secure components to prevent them from falling down.

  1. Remove anti-roll bar -1-  .
    G15155872Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front anti-roll bar

    1. 1.1 Unscrew nuts -3-  and counter at the screws -2-  at the same time.
    2. 1.2 Unscrew nuts -4-  and remove anti-roll bar clamps -5-  .
    3. 1.3 Lead out stabiliser -1-  with bearing.
  2. Replace screws and nuts.
scientia non olet · About LEMON Manuals