Subsequent Work

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Install front speed sensor.
> 451119 - REMOVING AND INSTALLING FRONT SPEED SENSOR - PORTION ON "INSTALLING"
Install front brake disc.
> 465019 - REMOVING AND INSTALLING FRONT BRAKE DISC - PORTION ON "INSTALLING"

> 465119 - REMOVING AND INSTALLING FRONT PCCB BRAKE DISC - PORTION ON "INSTALLING"
Tighten screw for drive shaft -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Drive shaft screw
1. 3.1 Raise the vehicle as far as required so that the wheel is not on the floor.
2. 3.2 Tighten screw for drive shaft -1- to the required initial tightening torque. Have another person press the brake when doing so.
  > Tightening - torque 200 Nm (148 ftlb.)
3. 3.3 Lower the vehicle.
4. 3.4 Tighten screw for drive shaft -1- . Have another person press the brake when doing so.
  > Torque angle 180°
5. 3.5 Fit hub cap -2- .