Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws | Heat shield to drive shaft | Tightening torque | 23 Nm (17 ftlb.) | ||
| Drive shaft to wheel hub | 1st step (wheels suspended in air, press brake while tightening)/M1 6 x 72 thread/always use new screws following removal | Tightening torque | 200 Nm (148 ftlb.) | ||
| Drive shaft to wheel hub | 2nd step (wheels on the ground)/M16 x 72 thread/always use new screws following removal | Torque angle | 180° | ||
| Drive shaft to transmission | M10 x 20 thread/always use new screws following removal | Initial tightening | 30 Nm (22 ftlb.) | ||
| Drive shaft to transmission | M10 x 20 thread/always use new screws following removal | Final tightening | + 90° | ||
| Fastening screws | Heat shield to frontaxle carrier | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Fastening screw | Heat shield to frontaxle carrier | Tightening torque | 20 Nm (15 ftlb.) |