Technical Values
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Upper trailing arm to wheel bearing housing | M10 thread | Tightening torque | 45 Nm | ||
| Upper trailing arm to mounting saddle | M10 thread/always use new screws or bolts and nuts following removal | Initial tightening | 50 Nm | ||
| Upper trailing arm to mounting saddle | M10 thread/always use new screws or bolts and nuts following removal | Final tightening | + 90° |