LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (40 Wheel Suspension Front Drive Shaft 2.9L -- 95B - MACAN (95B)) >> WM, 401519 Removing And Installing Upper Trailing Arm >> Removing Upper Trailing Arm

Removing Upper Trailing Arm

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper trailing arm -1-  .
    G15155765Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Upper trailing arm

    1. 1.1 Unscrew nut -2-  for the clamping screw on the wheel bearing housing -3-  and pull clamping screw on wheel bearing housing -3-  out of the wheel bearing housing.
    2. 1.2 Loosen upper trailing arm -1-  from the wheel bearing housing.
    3. 1.3 Unscrew the relevant screw -4-  and counter at the nut -5-  .
    4. 1.4 Remove the relevant upper trailing arm -1-  .
scientia non olet · About LEMON Manuals