LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (40 Wheel Suspension Front Drive Shaft 2.9L -- 95B - MACAN (95B)) >> WM, 400819 Removing And Installing Front-Axle Support >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Screws securing central cover for centre underbody to body Item 1 Tightening torque 2.5 Nm (1.75 ftlb.)    
G15155755Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Central cover for centre underbody		          
Cross-strut to front axle carrier, rear - 1st stage Item 21: Screw M12 x 42/replace Initial tightening 90 Nm (66.4 ftlb.)    
Cross-strut to front axle carrier, rear - 2nd stage Item 21: Screw M12 x 42/replace Final tightening + 135°    
Cross-strut to front axle carrier, front - 1st stage Item 22: Screw M12 x 51/replace Initial tightening 90 Nm (66.4 ftlb.)    
Cross-strut to front axle carrier, front - 2nd stage Item 22: Screw M12 x 51/replace Final tightening + 90°    
scientia non olet · About LEMON Manuals