Preliminary Work
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Support the engine on the body.
> 1001IN - SUPPORTING ENGINE ON THE BODY (ENGINE SAFETY DEVICE)
- Tie up wheel bearing housing on both sides of the vehicle with tension straps (e.g. > 9454 - strapping belts
) -1-
at the mounting saddle.
Wheel bearing housing mounting
- Remove front anti-roll bar.
> 407719 - REMOVING AND REINSTALLING FRONT ANTI-ROLL BAR - PORTION ON "REMOVING"
- Remove power-steering gear.
> 489019 - REMOVING AND INSTALLING POWER-STEERING GEAR - PORTION ON "REMOVING"
- Remove front level sensors.
- Remove both lower trailing arms.
> 401719 - REMOVING AND INSTALLING LOWER TRAILING ARM - PORTION ON "REMOVING"