LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (10 Engine - Crankcase, Suspension 2.9L -- 95B - MACAN (95B)) >> WM, 108319 Removing And Installing Engine Cover (Design Cover) (V6 Turbo) >> Installing Engine Cover (Design Cover)

Installing Engine Cover (Design Cover)

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  The rubber plug-in couplings must engage securely.
    2. 1.2  Check that the engine cover (design cover) is fitted securely by pulling on it.
scientia non olet · About LEMON Manuals