LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (10 Engine - Crankcase, Suspension 2.9L -- 95B - MACAN (95B)) >> WM, 101419 Removing And Installing Front Crankcase Cover (V6 Turbo) >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
Location De... Type Basic v... Toleran... Toleran...
Screws on crankcase cover Replace following removal. Initial tightening 3 Nm (2 ftlb.)    
Screws on crankcase cover, on belt side Replace following removal. Final tightening + 90°    
Screws on crankcase cover in oil guide housing Replace following removal. Final tightening 9 Nm    
Screw on guide tube for oil dipstick Replace O-ring. Tightening torque 9 Nm (6.5 ftlb.)    
Screws for air-conditioning compressor bracket - replace Initial tightening 8 Nm (6 ftlb.)    
Screws for change-over valve holder   Tightening torque 9 Nm (6.5 ftlb.)