Installing Oil Spray Jet

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Information

Risk of damage to oil spray valves:

Do not bend oil spray jets.
Bent oil spray valves must be replaced.

Install oil spray jet -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil spray jet
1. 1.1 Fit oil spray jet -1- .
2. 1.2 Fit and tighten new screw -2- .
  - Initial tightening 10 Nm (7.5 ftlb.)
  - Final tightening + 45°
Information

The crankshaft must be turned only in direction of rotation of the engine.
Fasten piston -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Piston and connecting rod on crankshaft
1. 2.1 Turn the crankshaft until the relevant connecting rod bearing is accessible.
2. 2.2 Fit connecting-rod bearing cap -3- .
3. 2.3 Oil new connecting-rod bearing cap screws -2- and fit and tighten them.
  - Initial tightening 50 Nm (37 ftlb.)
  - Final tightening + 90°
Install oil windage tray -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil windage tray
1. 3.1 Position oil windage tray -1- on cylinder block.
2. 3.2 Fit new screws for oil windage tray -2 and 3- and tighten in diagonally opposite sequence.
  - Initial tightening 3 Nm (2 ftlb.)
  - Final tightening + 90°