Subsequent Work

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Install air-conditioning compressor.
- WM, 873419 REMOVING AND INSTALLING AIR CONDITIONING COMPRESSOR
Install generator.
- WM, 272219 - REMOVING AND INSTALLING GENERATOR (V6 TURBO)
Install drive belt.
- WM, 137819 REMOVING AND INSTALLING DRIVE BELT (V6 TURBO)
Install particle filter.
- WM, 267419 REMOVING AND INSTALLING PARTICLE FILTER (V6 BITURBO)
Mount engine.
- 100127 Removing and mounting engine
Install engine.
- WM, 100119 REMOVING AND INSTALLING ENGINE (V6 TURBO)
Carry out the following Tester tasks when you start the engine for the first time:
1. 7.1 DME control unit: Automatic programming menu item.
2. 7.2 Only for Hybrid: Additional menu Decoupler commissioning.
3. 7.3 Perform adaptations and short tests and set the Ready status.
4. 7.4 Check the fault memory for relevant entries and correct them.