Securing Engine To Engine Crane
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Danger of objects or loads falling down
- Risk of squashing or crushing
- → Secure components to prevent them from falling down.
CAUTION:
Heavy components
- Risk of squashing
- → Wear personal protective gear.
- → Get someone to help if necessary.
Information
- The pictures shown in this document may differ from the original.
- VAS 6100 - Workshop crane must be secured to the engine.
Workshop crane on engine
- 1.1 Engage one hook of the > 3033 - lifting tackle in the rear transport eyebolt -1- on the engine. Engage the other hook of the > 3033 - lifting tackle in the front transport eyebolt on the engine -2- .
- 1.2 > VAS 6100 - Workshop crane must be lifted up slightly. Then tension the spindles slightly, making sure that the > 3033 - lifting tackle is adjusted evenly.