Mounting Engine

WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Danger of objects or loads falling down

Risk of squashing or crushing
1. → Secure components to prevent them from falling down.

Only if loosened during removal:
Secure engine mount -1- to the engine.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Left engine mount
1. 1.1 Fit engine mount -1- on the engine.
2. 1.2 Fit and tighten new screw -2- .
- Initial tightening 90 Nm (67 ftlb.)
- Final tightening + 90°
Information

Get another person to help during removal and mounting.
Carefully position the engine on the front-axle carrier.
Secure engine mount -1- to the front-axle carrier.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Left engine mount
1. 3.1 Fit and tighten screws -3- .
  - Tightening torque 55 Nm (41 ftlb.)
2. 3.2 Fit and tighten new screws -4- .
  - Tightening torque 30 Nm (22 ftlb.)
Remove workshop crane from the engine.