Subsequent Work
WARNING: This page is about a different car, the 2024 Porsche Macan, 2023 Porsche Macan, 2022 Porsche Macan, 2021 Porsche Macan, and 2020 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Only if removed in order to remove the double clutch transmission:
Install power-steering gear.
- Secure the locking cable.
- Connect ATF cooling line.
- Install air-conditioning compressor.
- Secure pressure hose to charge-air cooler.
- Install front underbody cover.
- Install rear cardan shaft.
- Only for vehicles with PCCB brakes:
Install front PCCB brake discs.
- Secure front brake callipers.
- Install front wheel housing liners.
- Install front wheels.
- Install filler neck for washer-fluid reservoir.
- Fill in coolant.
- Install cowl panel cover.
- Install front strut.
- Install DME control unit.
- Secure pressure hose to throttle housing.
- Install torque support.
- Install air cleaner housing.
- Install engine cover [design cover).
- Move bonnet to its normal position.
- Connect the battery.
- Perform suspension alignment.