Replacing Rear Lid Seal
- Remove rear lid seal
Rear lid seal
- 1.1 Pull off rear lid seal -1- at the side -4- of the rear glass panel -2- sideways.
- 1.2 Pull off rear lid seal -1- at the front -3- of the rear glass panel -2- in an upward direction.
- Install rear lid seal
Rear lid seal
Information
To make installation easier, the area should be moistened with a soapy solution.
- 2.1 Press rear lid seal -1- at the front -3- into the front mounting from above and centre it.
- 2.2 Press rear lid seal -1- at the side -4- into the mounting for the rear glass panel -2- .